The math behind it
A sloped roof has more surface than the footprint under it. The pitch multiplier is √(1 + (rise ÷ 12)²): a 4/12 roof is about 5.4% larger than its footprint, a 6/12 roof about 11.8% larger and a 12/12 roof about 41.4% larger. Deep eaves, common on island homes, add surface that is easy to leave out.
Metal versus shingle
- Metal panels run in continuous lengths, so waste is usually lower on simple gables but climbs fast on hips and cut-up roofs. Estimates should also list trim, ridge, closures and fasteners.
- Shingles are ordered by the bundle (about three per square) plus starter, ridge cap and underlayment.
Checking the carrier’s estimate
- Find the total squares and waste percentage on the roof page of the estimate.
- Differences of more than 5–10% from your result deserve a closer look or a field measurement.
- Look for steep and high-roof charges, especially on two-story homes and hillside lots.
- Confirm whether the estimate prices full panels or only “repairs” on a metal roof whose panels can’t be matched — see our roof claim appraisal page.
Questions about this tool
What is a roofing square?
One square is 100 square feet of roof surface, measured on the slope rather than the footprint.
Is a footprint calculation good enough for appraisal?
It is a sanity check. Roofs with several pitches, dormers or additions should be measured plane by plane or with an aerial report.
